2/3 3D Edelweiss
2/3 3D Edelweiss
International Ring Size Guide
Mood Size EU (mm) size of the circumference |
US | UK | Diameter (mm) |
|---|---|---|---|
| 50 | US 5 | J | 15,7 |
| 52 | US 6 | L | 16,5 |
| 54 | US 7 | N | 17,2 |
| 56 | US 8 | P | 17,8 |
| 58 | US 8,25 | P 1/2 | 18,4 |
| 60 | US 9 | R | 19,1 |
| 62 | US 10 | T | 19,7 |
| 64 | US 10,75 | V | 20,3 |
| 66 | US 11,5 | X | 21 |
| 68 | US 12,25 | Z | 21,5 |
| 70 | US 13 | Z+1 | 22,3 |
| 72 | US 13,75 | 22,9 |
Determine the correct size of your ring
1st method: using a ring you already own (diameter)
You already have a ring on hand? Then simply measure the inside diameter of the ring. You can then find your size by converting using the table above.
If you can't find your exact size, then take the next size up.
2nd method: order a multisizer
You can order our multisizer to mesure your finger here.
3rd method: measure the circumference of your finger
To find out your ring size, simply take a piece of wire, dental floss or paper. Wrap it loosely around the spot on your finger where you want to wear the ring and mark where it overlaps. Then measure the length. The millimeters measured reflect the inner circumference of the ring.
If you can't find your exact size in the chart above, then take the size that is above. For example, if your finger circumference is 57mm, then take the size 58.
Example : 52 mm (circumference)
2/3 "3D Edelweiss"
Design: Amila Pousaz
Precautions / informations
Limited stock. The insert and the gems are not included in the price.
This addon is made of 2 overlapping parts: a coloured aluminium bottom part and a steel top part. For this addon to be complete, both parts must be worn together.
The steel part cannot be worn alone and the coloured aluminium part cannot be worn alone either.
The aluminium part is the interchangeable part of this new creation. You can change its colour as you wish.
The steel part cannot be worn on top of "standard" addons, it must be worn with aluminium rings specially designed for this assembly.
Please note that there may be a difference in colour between the photos on the website and the model you receive.
The creation time is about 10 working days.
