Addon 3D Stag bellow cut
Addon 3D Stag bellow cut
International Ring Size Guide
Mood Size EU (mm) size of the circumference |
US | UK | Diameter (mm) |
|---|---|---|---|
| 50 | US 5 | J | 15,7 |
| 52 | US 6 | L | 16,5 |
| 54 | US 7 | N | 17,2 |
| 56 | US 8 | P | 17,8 |
| 58 | US 8,25 | P 1/2 | 18,4 |
| 60 | US 9 | R | 19,1 |
| 62 | US 10 | T | 19,7 |
| 64 | US 10,75 | V | 20,3 |
| 66 | US 11,5 | X | 21 |
| 68 | US 12,25 | Z | 21,5 |
| 70 | US 13 | Z+1 | 22,3 |
| 72 | US 13,75 | 22,9 |
Determine the correct size of your ring
1st method: using a ring you already own (diameter)
You already have a ring on hand? Then simply measure the inside diameter of the ring. You can then find your size by converting using the table above.
If you can't find your exact size, then take the next size up.
2nd method: order a multisizer
You can order our multisizer to mesure your finger here.
3rd method: measure the circumference of your finger
To find out your ring size, simply take a piece of wire, dental floss or paper. Wrap it loosely around the spot on your finger where you want to wear the ring and mark where it overlaps. Then measure the length. The millimeters measured reflect the inner circumference of the ring.
If you can't find your exact size in the chart above, then take the size that is above. For example, if your finger circumference is 57mm, then take the size 58.
Example : 52 mm (circumference)
Addon 3D "Stag bellow cut"
Design: Muriel Jeanmonod
Precautions / information
Limited to 100 units.
This addon is made of 2 overlapping parts: a colored aluminum lower part and a steel upper part. For this addon to be complete, both parts must be worn together. Nevertheless, we've tried wearing it without the insert (the part that goes underneath) and it's really nice despite a few millimeters of space that can make the part move.
Please note that there may be a difference in shade between the photos on the site and the model you receive.
The creation time is about 15 working days.
